What is the Nitrogen Cycle?
Every new tank must under go what is known as Cycling, The Nitrogen Cycle, New Tank Syndrome, it is known many other names. During this time you must closely watch your tank and monitor the levels of Ammonia, Nitrites, and Nitrates. By monitoring these parameters you will be able to tell when your tank has become habitable for fish, or if it is still in the Cycling phase.
Cycling a tank properly is one of the hardest parts of fish keeping as you MUST refrain from fully, or partially, stocking your tank with other than the barest necessities. The conditions of the water that your tank will be going through will be dirty and cause a large amount of stress to any fish, possibly killing them. Ammonia will burn any animal both inside and out. It is essential for you to have a liquid test kit of your own to go through this process as you will be using it daily. Dip or strip kits are available, but have been proven to be more inaccurate than liquid kits.
Steps of the cycle Ammonia The cycle is started when ammonia (NH3) is introduced into the tank as fish waste. This ammonia builds up until the bacteria that eat it start to form a colony (a bacteria bloom may be observed as white cloudyness within the tank), and can convert the ammonia to nitrite as fast as they are produced. When the amount of ammonia spikes, and starts to decline, you know you are going into the second phase of the cycle.
As your ammonia starts to decline, you will see the nitrite levels rise then spike. Nitrites are the byproduct of the ammonia-eating bacteria, and are also highly toxic to fish. Like the cycling in step one, you must build up enough nitrites to form a second colony of bacteria that will dispose of them as they are produced. These bacteria will in turn create nitrate. Once your levels of nitrites AND ammonia have reached 0ppm ("parts per million"), your tank is said to have been cycled.
Nitrates are the final product of the nitrogen cycle. Nitrates are not toxic to fish in low concentrations, although they become toxic somewhere above 20ppm depending on the species.
There are two methods of keeping the level of nitrates at acceptable levels. The first is regular partial water changes (20-50% every 1-4 weeks, depending on stocking levels). The second is adding plants to the tank - nitrate levels can drop to 0ppm in a heavily planted tank. However water changes are still necessary to remove other substances such as DOCs (dissolved organic compounds), solid fish waste and replenish dissolved minerals that aquatic animals and plants may need.
How to Start Your Cycle
Fishless Cycle Method The fishless cycle is becoming very popular with aquarists because
It is faster
It is considered more humane
The fishless cycle consists of artificially adding ammonia to the tank instead of using fish waste straight from the animals. This can be accomplished in multiple ways, the simplest way (however slower) is to buy 1 uncooked cocktail shrimp from the grocery store and anchor it at the bottom of your tank. As this shrimp decays it will release ammonia into the water and beginning your cycle. This process can take anything from 2-6 weeks and will vary vastly from tank to tank. Daily tests on the water will help monitor the progress.
The second method to the fishless cycle would be to pour straight household liquid ammonia into the tank (can usually be found at home improvement stores etc). This method is the fastest cycling method, however it takes more attention. You will need to constantly monitor your tank’s levels to keep them at an acceptable rate.
Fish In Cycle Method
Complete chemical cycle with fish
1-Food is given to fish. 2-Ammonia is given off. 3-Bacteria converts it to Nitrite. 4-Bacteria converts Nitrite to Nitrate. 5-Water changes carried out to reduce levels of Nitrate. 6-Sunlight enables plants to photosynthesis. 7-Bacteria in the substrate breaks down Mulm. 8-Plants give off Oxygen when lit. 9-Plants absorb Carbon dioxide during the day to grow. * Plants give off Carbon dioxide during the night.
This is the most typical way tanks are cycled, usually because it is how it is recommended to the new aquarist if they are even told about the cycling process.
This method is accomplished by simply putting fish into a new tank, their waste breaks down into ammonia and your cycle will start. This cycle can easily take 50-60 days while fishless can take much less. Frequent partial water changes will be needed (at least every 2-3 days) in order to keep the fish alive.
Not a recommended method as the animal suffers from ammonia burns. Delicate species can often die, if not during the cycle, often shortly afterwards.
Seeding Material Cycle Method If you already have an established tank, you can use the bacteria growing there to greatly reduce the time needed for a cycle. The fastest way to accomplish this is to take dirty filter media (sponge, floss, etc.) from the existing tank and use it in the new tank. The bacteria on the dirty media will instantly cycle the new tank. There is no need to clean the dirty media-doing so may reduce the beneficial bacteria. The dirty media should be left in place for one month or more before cleaning. Other methods include running a second filter on an existing tank for a month, then moving the second filter to the new tank, but this takes much longer than putting dirty media in the new tank's filter.
Please note that it is always necessary to treat tap water with a dechlorinator such as Prime or Amquel, to deactivate chlorine/chloramines. Otherwise, these substances will kill the beneficial bacteria. Also note that filter media containing beneficial bacterial should never be cleaned in tap water, only in water drained from the aquarium during a water change, for the same reason.
Many fish stores or fish friends will trade used filter media for clean media. Just ask!
Commercial Seeding Cycle Method There are a few products available which greatly speed up the denitrification process by providing the necessary bacteria in huge quantities in a bottle. All these product claim you can add fish from day one.
Stability - by SeaChem claim that their product allows fish to be added immediately as long as their product is added to the tank every 24 hours for the first 7 days. It also has a organic waste bacteria in it to clear up mulm.
One and Only - by DrTim's Aquatics™. Dr. Timothy A. Hovanec - The inventor of BIO-Spira and SafeStart. Product instantly cycles your tank.
Safestart - Tetra UK Relatively new (Aug '06) and seemingly based on MarineLand's initial research?
Cycle and other names - Various companies. This product is currently available in two types, the old and the new. The product has came under close scrutiny in 2005 due to claims by the other companies above. It would appear the old product may be based on wrong research done in the 1970s and misidentified the bacteria (Nitrobacter, etc.) causing nitrifying in the aquarium and does not actually reduce the cycle time of your tank significantly. The new version seems to work better.
See Bacteria bottles, do they work?.
There may be trace amounts of ammonia exposed to the animals. So only stock or feed very lightly and monitor levels closely.
Hi-tech Cycle Method Add one of the major three instantly cycling nitrifying bacteria bottles (see above) as per its instructions and dose daily for a week with a high quality water conditioner like Prime or Amquel+. The water conditioner will convert all ammonia or nitrite into a harmless form (for 24 hours) that the bacteria can still consume.
The bacteria in the bottle will instantly start to consume the ammonia or nitrite and begin to grow in population to match the tank's production of ammonia or nitrite. So in effect any leftover ammonia/nitrite caused by overstocking or overfeeding is rendered harmless.
This method is highly recommended by the Aquarium Wiki Encyclopedia as it rapidly renders the tank fully cycled within a few days regardless of the overstocking or overfeeding mistakes made by beginners. It is extremely unlikely to cause any harm to any aquatic pet.